Admin Commands in "td prompt" mode

dbg

dm[.<width>] {<address> | <range>}    : Display Memory.
pm[.<width>] <address> <value>        : Patch Memory.
fm[.<width>] <range> <value>          : Fill Memory.
dr                                    : Show special registers.
pr <task> <register> <value>          : Patch register.
qt [<task>]                           : Query Task(s).
qq [<queue>]                          : Query Queue(s).
qs [<sema>]                           : Query Semaphore(s).
qr [<region>]                         : Query Region(s).
qp                                    : Query Partitions.
tse                                   : Trace OS service calls.
tdi                                   : Trace Dispatch breaks.
ss                                    : Show Stack sizes.
fl [<option> on | off]                : Set (Show) options.
    <option> = simout | debug
cpuload start                         : Start measurements.
cpuload stop                          : Stop measurements.
cpuload show                          : Display load results since last show command.
di [<addr>]                           : Disassemble memory.
cc <filename>                         : Check Code checksum.
cc set_code_info {<adr> <sz> <chs>}+  : Set code section info
  <adr>: hex.startaddress of section
  <sz> : dec.size of section
  <chs>: hex.checksum of section
  Multiple structs can be given !
cc scan_now                           : Scan code now
cc set_codescan_tmr <timeout_mS>      : Set periodical scan timer (0=OFF)
trq [<trace>]                         : Query real time traces.
trs <trace> [ON | OFF]                : Set status of real time traces.
db <addr> [by <task>] [-c <count>] [-s <stack depth>] [data | dataw | datar | datawr]
da [<db options> [-a <action>] {[ ; -a <action>]}
                                      : Define trace or action points.
lb                                    : List tracepoints.
cb (* | <number>)                     : Clear tracepoints.
qvt                                   : Query of vs-traces.
rvt <vtrace> [<reader>]               : Restart readers of vs-traces.
fvt <vtrace>                          : Flush contents of vs-traces.
svt <vtrace> [on | off] [cycl | nocycl] [check | nocheck] [disc | nodisc]
                                      : Set vs-trace mode.
spt [-m <module>] [-l <prio>]         : Set priority and
[-f <fgcolor>] [-b <bgcolor>]           colors of print module(s).
spo [<time | module> on | off]        : Set (Get) trace output format.
autocol [-l level] [-f fg] [-b bg]    : Show/Set autocolors.
suspend <reader>                      : Suspend trace reader
resume <reader>                       : Resume trace reader

err

stats {-c}                            : Display/Clear error statistics.
wreset                                : Force WARM RESET.
creset                                : Force COLD RESET.
getunr                                : Get first unrecoverable error.
recov [<class> <level>                : Get first unrecoverable error.
getpmd                                : Get Post Mortem Dump.
wd [<path>]                           : Display/change watchdog timer path
                                      : to reset or nmi.
filter [<class>]                      : Display/change filter on error display.
escal [<threshold> <timeinterval>]    : Display/change or disable escalation parameters.
sw_time [<time>]                      : Display/change or disable software watchdog timeout.
save [<flag>]                         : Display/change flag error saving on flash.
                                      : flag: 'dis' no saving on flash.
                                      :       'cab' save crach area on flash.
                                      :       'all' save crach area and error buffer on flash.
suspend [<read>]                      : suspend output of reader <read>
resume [<read>]                       : resume output of reader <read>

xapi

time                                  : Show relative and network time.
timers                                : Show function and message based timers.
cm                                    : Show common memory pool usage.
cm -c                                 : Check common memory pool usage.
cm [-a] <pool_nr>                     : Show used (-a : all) memory buffers.
dp [<pool_name>|<pool_id>]            : Show information about buffer pools.
df                                    : Show information about flow controls.
db {<buf_ptr>}                        : Show buffer info and contents.
dm {<msg_ptr>}                        : Show message.
dm {<msg_ptr>} b                      : Show message and linked buffer.
tmr_suspend                           : Suspend timer (no actions when timer expires).
tmr_resume                            : Resume timer.

guard

delta                                 : Display guard delta history.
adapt [<time>]                        : Display/change guard adapt timeout.

rip
ni
etha
atm
eth
llc
atmf
iwu
sock
ipoa
tcp
pptp
config
system
softwa
phoneb
adsl
nat
cip
ppp
bridge
dns
dhcp
dhcpc
tftp
sachem
eoc
aoc
hs
mlit
msit
golden
tdsl