Configuring the Alcatel Pro for Bridged mode

It is possible to bridge the Alcatel SpeedTouch Pro to act as bridge. In order 
to do this you will require PPPoE software, such as RASPPPoE or Enternet, to 
establish a connection. 


Open the web interface by opening a browser to the IP address of the Pro router.

From the interface select 'PPP' from the left hand menu, and delete all entries.

Next select 'Phonebook', and delete all entries as well.
Create a new 'Phonebook' entry with the following details and click 'Add':

Name: Bridge
VPI:   8
VCI:  35
Type: Bridge

Then select 'Bridge' from the menu and add the Bridge connection - leave the 
default settings as they are.

Once this is added, click 'Save All' to save the bridged configuration.

Connect the modem to the ethernet port of the computer with the PPPoE software
and create the dialler within the software.